Introduction
This compact kit from VANALIA combines two dual-ended pickers, replacement wax tips, a tapered stainless steel tweezer, clay sheets and a grooved tray to speed up gem placement on nails, diamond paintings and other small craft projects. It’s designed to help you pick, orient and position tiny flat-back gems with greater control than bare fingers.
Price: USD 8.99 (prices may change).
What’s in the kit
- Two dual-ended pens — each with a soft wax pickup tip on one end and a steel positioning tip on the other.
- Six extra wax tips — replacements so you can swap worn tips or share tools between users.
- Precision tweezer — tapered stainless steel for gripping tiny sequins or gems.
- Six clay sheets — used to load the wax tips and maintain tackiness.
- Grooved shake-to-flip tray — aligns flat-back rhinestones face-up when shaken, saving time flipping individual stones.
How the dual-ended design works
The pens combine two functions in one tool. Use the soft wax tip to lift a rhinestone by light contact; the tack picks up the gem without glue or tweezers. Flip the pen to the steel end to nudge the stone into position or to press into a clay sheet to convert the pen into a diamond-painting applicator. The two functions let you pick, place and finalize with a single instrument.
Using the wax tips
- Touch a clean wax sheet with the wax tip to charge it.
- Lightly press the wax tip onto the rhinestone; it should adhere to the tip.
- Move to the work surface and release the stone by pressing it against the target or using the steel tip for precise placement.
When to use the steel tip
The metal tip acts as a micro-positioner. It can push a gem into place, align edges, or press into a clay sheet for diamond painting where stones are picked up slightly differently. The steel tip is also useful when you need very fine adjustment after the gem is set down.
Practical step-by-step for nail art
- Prepare nails: finish polish and top coat tackiness, or apply a small dot of adhesive where the gem will sit.
- Charge a wax tip on a clay sheet so it picks up stones reliably.
- Use the wax tip to lift a gem from the tray and move it over the nail.
- Switch to the steel tip for final alignment and gentle pressing into adhesive.
- Seal edges with a top coat if the design allows; avoid smearing polish with the metal tip.
Using the shake-to-flip tray
The grooved tray organizes many tiny flat-back stones so their faceted side faces up after a quick shake. Place mixed gems into the tray, tilt and shake gently; grooves guide stones into upright positions. This removes the need to flip individual pieces one at a time and speeds a multi-stone design process.
Key features in context
- Two pens: Having duplicates allows one pen to stay with your most-used wax tip while the other can be kept clean for steel-tip-only tasks.
- Extra wax tips: These extend usability without needing immediate replacements and let you swap colors/grades of wax as needed.
- Precision tweezer: Useful when a firmer grip is required than the wax tip provides, or when working with sequins and other non-flat-back pieces.
- Clay sheets: Provide a quick way to recharge wax tips and maintain consistent tack.
- Grooved tray: Speeds setup for projects that use many small stones by aligning them automatically.
Limitations and suitability
This kit focuses on small gem placement tasks and is best suited for flat-back rhinestones, nail gems, diamond painting drills and light jewelry accents. It does not include adhesive, storage boxes for large collections of gems, or tools for heavy-duty jewelry assembly. For very large stones, unusually shaped embellishments, or high-volume professional production you may need additional specialized equipment.
Care and maintenance
- Keep wax tips covered or stored on the clay sheet to prevent dust contamination.
- Wipe the steel tip with a soft cloth after use to remove adhesive residue.
- Replace wax tips when they lose tack; extra tips are included so replacements are immediate.
- Store the tray and small parts in a closed container to keep tiny stones from scattering.
Safety notes
- Steel tips are pointed; handle with care to avoid skin or eye injury.
- Keep small parts away from children and pets to prevent choking hazards.
- Use adhesives in a well-ventilated area and follow any manufacturer directions for glues you choose to use.
Pairing and supplies
To create coordinated looks consider pairing the kit with a matching rhinestone assortment. For example, a Champagne gold multi-shape rhinestone set provides a range of sizes and shapes that work well with intricate nail layouts: Champagne gold rhinestone set Champagne gold rhinestone set.
Who this kit is for
Suitable for hobbyists and small-scale professionals who need a compact, multi-function set for nail art, diamond painting and light craft embellishment. The included tweezer, extra wax tips and grooved tray make it a convenient starter kit for those who want tools that handle both pickup and precise placement.
Conclusion
The VANALIA dual-ended rhinestone picker pen kit brings together pickup, placement and alignment tools in one small package. With two pens, spare wax tips, a tapered stainless steel tweezer, clay sheets and a grooved flip tray, it offers a practical set of essentials for detailed gem work on nails and small crafts. Keep tips clean, use the tray to speed prep, and replace wax tips as needed to maintain consistent performance.